Types of Commercial Truck Wrecks

Spread the love

Driving on roadways is a dangerous activity that presents risks for anyone that is on the road. It does not matter what type of vehicle you are driving, or if you are driving at all. If you’re in a vehicle on the road, you risk being in a car wreck and needing an auto accident attorney.

Commercial drivers spend more time on the road than most people, and because of this, they are at more risk. There are many different kinds of accidents on the road, but commercial truck wreck types are generally narrowed down to a few types.

Accidents Caused by Other Drivers

People that drive personal vehicles are frequently the cause of many commercial truck wrecks.

Wide-Turn Collisions: These are generally always the fault of the smaller vehicle. Tractor-trailers must take extremely wide right-hand turns. If they do not accommodate for the length of the trailer by making the wide turn, they will run over the adjacent curb and sidewalk. Vehicles behind a big truck tend to mistake the direction of the turning truck, striking the truck on the right side as they cut off the wide turn.

Blind Spots: Personal or smaller vehicles behind a truck are difficult for big trucks to see. Smaller vehicles that remain in the blind spot of a truck are often hit during lane changes. A good rule of thumb to follow: If you cannot see a truck driver in the side mirrors, the truck driver cannot see you, meaning that you are in the blind spot.

Accidents Caused by Truck Drivers

Blowout: Tire blowouts are very frequent on semi-trucks. A blowout occurs when a tire explodes or deflates instantly. A blowout can cause a truck driver to lose control. The debris from the tire also becomes a hazardous obstacle blocking the road. Improper air pressure and poor tire maintenance are often the cause of blowouts. In some cases a bad road is the culprit.

Jackknife: This occurs when the trailer of a rig is at a 90 degree angle to the cab. When a truck is jackknifed, it has no steering capabilities. Excessive speed on a corner or bend is a common cause for the accident. It can also happen as a result of a slick, icy, or rainy road. A trailer that is fully loaded has more inertia than the cab. The trailer will slide faster than the cab, creating the jackknife.

Lost Load: Improperly secured loads will cause the load to spill out onto the roadway. This is a common culprit of multiple car pile-ups on the road. Reasons for lost loads include poor equipment maintenance and inattentive drivers.

Rollovers: When a truck completely rolls over on its side, it is considered a rollover. Rollovers are sometimes a result of high winds and not the fault of a driver. However, it is more common for a rollover to be the result of excessive speed on a curve or bend.

Commercial truck wreck types can vary greatly. The important thing to remember is that a skilled truck accident lawyer can help you get the compensation you need to get your life back on track.

References

https://www.truckdrivingjobs.com

 

https://www.fmcsa.dot.gov/safety/data-and-statistics